Adjusting The Fixed Legrests; Adjusting The Angle Adjustable Legrests; Adjusting The Calf Pads - Invacare XLT User Manual

XLT
●○○
Difficulty:
Loosen the screws A on both sides.
1.
2. Adjust the footbow to the correct height using one of the six
holes B in the footbow tube.
3. Retighten the screws and adjust the calf-strap.
WARNING!
Risk of injury
The footbow can fall out if the screws are not tightened
properly.
– Make sure that both screws are positioned in the holes
on the tube.
WARNING!
Risk of catching the ground
– The distance between the lowest part of the footrest
and the floor or ground must be at least 40 mm.
CAUTION!
– Make sure that the screws do not protrude out of the
casing.

12.3 Adjusting the fixed legrests

B
A
●○○
Difficulty:
Height adjustment
Do not adjust the upper screw B.
Loosen the screw A.
1.
When adjusting the height a clicking sound will occur. One
"click" is one step in height.
2. Pull the legrest until you have obtained the correct height and
the screw is caught by one of the recesses on the legrest tube.
3.
4. Retighten the screw.
WARNING!
Risk of catching the ground
– The distance between the lowest part of the footrest
and the floor or ground must be at least 40 mm.
46
Tools: 5 mm Allen key
Tools: 5 mm Allen key

12.4 Adjusting the angle adjustable legrests

A
●○○
Difficulty:
Height adjustment
Loosen the screw A.
1.
2. Adjust the legrest into a suitable height and the screw is caught
by one of the recesses on the legrest tube.
3.
4. Retighten the screw.
WARNING!
Risk of catching the ground
– The distance between the lowest part of the footrest
and the floor or ground must be at least 40 mm.

12.5 Adjusting the calf pads

C
A
●○○
Difficulty:
Depth adjustment
The calf pads can be fitted in two different depth positions.
1. Swing the pad forwards.
Remove the screw A.
2.
Remove the large nut B on the reverse side and place it in the
3.
other attachment hole.
4. Move the calf pad to the new position and secure it into place
with the screw.
Height adjustment
The height of the calf pad can easily be adjusted using the knob screw
C.
WARNING!
Risk of catching the ground
– The distance between the lowest part of the footrest
and the floor or ground must be at least 40 mm.
Angle adjustment
See chapter 3.7 Swiveling legrests, page 9 .
Tools: 5 mm Allen key
B
Tools: 5 mm Allen key
1512799-A