Invacare XLT User Manual page 24

XLT
The wheelchair tie-down positions where the restraint system straps
must be placed are marked with snap hook symbols (see following
figures and section 2.3 Labels and symbols on the product, page 5 ).
1. Using the front and rear straps of the 4-point restraint system,
secure the wheelchair to the vehicle mounted rails. Refer to the
user manual supplied with 4-point restraint system.
24
Front side tie-down positions for belt straps:
1. Attach the front straps above the castor supporters as shown in
the two figures above (see location of the attachment labels).
2. Attach front straps to the rail system referring to best practice
recommended instructions from the safety belt manufacturer.
3. Release parking brakes and apply tension front straps by pulling
the wheelchair backwards from the rear.
4. Re-apply parking brakes.
1512799-A