Invacare® TDX® SP2 Series
1. Loosen screws and clamping levers of dual link
adjustment assembly A and screws of upper and lower
rotational pivots B.
2. Adjust component to desired position.
3. Tighten screws and clamping levers.
5.16 Adjusting Trunk Supports
5.16.1 Adjusting Width
66
Fig. 5-46
Fig. 5-47
1. Loosen knobs A that hold lateral supports.
2. Adjust component to desired position.
3. Tighten knobs.
5.16.2 Adjusting Height
•
5 mm Allen key
1. Loosen screws A .
2. Adjust component to desired position.
3. Tighten screws.
5.16.3 Adjusting Depth
•
5 mm Allen key
Fig. 5-48
Fig. 5-49
1578997-J