Ethernet Communications; Communication Format; Application Example; Communications Format - Omron G9SP Series Manual

2 - 3

Ethernet Communications

This section provides a description and example of connection to a Mitsubishi
Electric Standard PLC. The FINS/UDP Protocol are available for connection with a
Mitsubishi Electric Standard PLC.
2 - 3 - 1

Communications Format

Refer to Section 7 Communications with a Standard PLC Using an Option Board of
the G9SP Series Safety Controller Operation Manual (Cat. No. Z922).
2 - 3 - 2

Application Example

System Configuration
This section uses the following example to describe how to access the
G9SP-series Controller by performing Ethernet communications through a
Ethernet Communica- tions Board (CP1W-CIF41) from a Mitsubishi Electric
Standard PLC Q series.
Mitsubishi Standard PLC(See Note.)
Switching HUB
Note:
CPU Unit (Standard PLC)
Ethernet Interface Unit
Support Software (for setup and creating ladder
programs)
2-16
Ethernet
FINS/UDP
Q002
Interface
Unit
192.168.250.18
G9SP Series
Option Board
CP1W-CIF41
192.168.250.11
This example uses the following Mitsubishi Electric Standard PLC.
Product Model/Version
Q02HCPU
QJ71E71-100
GX Developer Version 8.90U