Advertisement
CONNECTOR AND DIMENSIONS
CONNECTOR AND DIMENSIONS
■ CONNECTIONS
12VDC/24VAC
12VDC/24VAC
CAUTION :
CAUTION :
Check for polarity when using a DC 12V / AC 24V.
Check for polarity when using a DC 12V / AC 24V.
INSTALLATION
E
C
B
A
VIDEO OUT
VIDEO OUT
A. Loosen the fixing screw using the L-wrench.
B. Separate the upper case and the base case.
C. Loosen the inner screws using a screwdriver.
G
D. Detach the gimbal from the base case.
E. Cut a hole in the ceiling for routing the cables.
F
F. Place the camera horizontally on the ceiling,
drill the screw holes at the marked two positions.
G. Pass the power cable and video cable from the
camera unit through the cable hole in the ceiling.
D
H. Align the screw holes of the camera unit with
the holes in the ceiling, secure with the two
screws.
I. Fix gimbal to the base.
C
J. Install and adjust the camera unit.
K. Adjust the dome to show the lens through the
camera window, attach to the base.
L. Put the upper case and the base together.
M. Tighten the screw for the upper/base cases
not to be separated .
Advertisement
