PRECAUTIONS Do not open or modify. Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. Do not put objects into the unit. Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages. ...
Page 3
FEATURES 1/3” Sony Super HAD II CCD High Resolution 560 TV Lines 9 ~ 22mm Varifocal Auto Iris Lens Electronic Day and Night Star-Light (Super Low Light Technology) DRC (Dynamic Range Compressor) Dark spots in images particularly become more visible without overexposing the bright spots to create one perfect image. 3D-DNR (3D Digital Noise Reduction) Produces less noise and more color during low-light application.
Page 4
DIMENSION (mm) & POWER REQUIREMENT POWER REQUIREMENT: 12VDC @1A 24VAC @ .500mA Power Wire Maximum Distance COAXIAL CABLE TYPE MAXIMUM DISTANCE Wire Gauge 12VDC 24VAC 24 AWG 80ft 323ft RG59/ U 750feet 22 AWG 128ft 513ft 20 AWG 203ft 815ft RG6/U 1,000feet 18 AWG...
INSTALLATION Included with DW Indoor Dome Camera: User Manual Mounting Template Security L-Key Single Sided Hex Key Secondary BNC Cable for a Field Monitor Two (2) Screws and Two (2) Dry Wall Anchors Camera Installation Use the mounting template to mount the camera. Using the security L-key to loosen the four screws that secure the vandal proof dome cover, Remove the vandal proof dome cover to access the screw holes to mount the camera.
Page 6
INSTALLATION A. Loosen the fixing screw using the L-Wrench. B. Separate the upper case and base case. C. Loosen the inner screws using a screwdriver. D. Detach the gimbal from the base case. E. Cut a hole in the ceiling for routing the cables. F.
LENS ADJUSTMENT A.Adjust the panning (360 ) and tilt (60 ) positions. B. Use the Zoom lever to set the zoom position. C. Use the Focus lever to set the focus.
EXPOSURE LENS DC (0~100) / MANUAL / VIDEO. (DC Lens is recommended.) SHUTTER 1/160 /1/100 / FLC / 1/250 ~ 10000 / SENS-UP x2 ~ x250 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC (Auto Gain Control) MAX-DR OFF / ON (0 ~ 20) (Electronic Wide Dynamic Range)
Page 11
FUNCTION MIRROR OFF / MIRROR / V-FLIP / ROTATE SHARPNESS 0 ~ 31 GAMMA 0.05 ~ 1.00 / USER FREEZE OFF / ON NEGATIVE OFF/ ON OFF / LOW / MIDDLE / HIGH 3D-DNR 3D-DNR (3D Digital Noise Reduction) D-ZOOM OFF / ON (x1.0 ~ x32 PTZ) OFF / ON SLC (Side Light Compensation)
Page 12
PRIVACY MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 255 TITLE...
SYNC SYNC INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET EXIT EXIT Exit the menu SAVE&EXIT Exit the menu and save the setting FACTORY SET Reset the menu setting to factory default...
Camera TYPE Color / BW D1363D922 SPECIFICATIONS: Mount Surface Image Device Super HAD II CCD Size 1/3" Pixels-Total 811(H) x 508 (V) Pixels-Effective 768(H) x 494 (V) Scanning System 525 line, 2:1Interlace Horizontal Frequency Internal Mode 15,734Hz Vertical Frequency Internal Mode 59.94Hz F1.2 0.14 Lux...
Starlight D1363D, D1363D922 Indoor Dome Camera User Manual Version #1: Camera without ICON Menu ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference. 11192010...
Page 16
OSD SWITCH FUNCTIONS SETUP [DC] - Brightness (DC Lens is recommended.) LENS Manual. Shutter is available. FLK (Flicker Free) SHUTTER ESC (Electronic Shutter Control) - Brightness Adjustment Manual Adjustment ATW 1800K ~10500K (ATW is recommended). WHITE BALANCE Manual Adjustment AWC (Auto White Balance) BACKLIGHT OFF / LOW / MIDDLE / HIGH NORMAL / HIGH / OFF (When the AGC is Off, DNR is not available.)
Page 17
Model D1363D, D1363D922 SPECIFICATIONS: Mount Surface Image Device 1/3" Super HAD CCD Pixels-Total 811(H) x 508(V) Pixels-Effective 768(H) x 494(V) Scanning System 525 line, 2:1Interlace Horizontal Frequency Internal Mode 15,734Hz Vertical Frequency Internal Mode 59.94Hz OSD Functions Day & Night AUTO / COLOR / BW Sens-up AUTO / OFF ( x128 )