Input Channels; In1 Input; In2 Input - Adash 4300 VA3Pro User Manual

ADASH Ltd. Adash 4300 – VA3Pro

Input channels

The inputs labeled IN1, IN2 are used for AC/DC signals. The input labeled TRIG is used for trigger signals,
usually tacho (speed probe). All inputs have several pins. IN2 allows the user to connect a tri-axial sensor.
The AC inputs allow the measurement of a maximum voltage peak of +/-12V. The DC inputs allow the
measurement of a maximum voltage peak of +/-24V.

IN1 input

1 – CH1 AC/DC INPUT
2 – GROUND
3 – NOT USED
4 – SHIELDING
5 – NOT USED
6 – NOT USED
7 – NOT USED

IN2 input

1 – CH2 AC/DC INPUT
2 – GROUND
3 – CH1 AC/DC INPUT
4 – SHIELDING
5 – CH3 AC/DC INPUT
6 – NOT USED
7 – NOT USED
14
For further technical and contact information visit www.adash.com, email: info@adash.cz