Mechanical System - Eiki ESL SERIES Service Manual

322-2:PRINCIPLES OF OPERATIONS
2-1 MECHANICAL SYSTEM
ESL-MODELS
SSL & SSL-OL MODELS
STOP
REWIND 1 2 3
"STOP"
"MIC"
"STOP"
~
The
El
Kl SSL-series projector is controlled by a single lock-out Rotary Function
Switch. When the rotary function switch is positioned at;
Film path is fully open. Holding the film by the finger tips, beginning at entrance
guide, pull the film along the slot path as indicated by the orange arrows. Attaching
the film to the take- up reel completes the film loading.
Turn Function Switch To;
Film path is now closed. The film perforations are engaged with No. 1, and No.
2 sprockets, and the cam claw. The upper and lower loops are formed.
The PA (Public Address) system can be used at this position.
Motor runs advancing the film forward.
Projection lamp is on for forward projection.
Motor is off and the film stops.
Turn Function Switch counter-clockwise to;
Rewinds the film through the film path. Conventional rewinding from reel to reel can
also be done.
The ESL-series projector employs electronic touch button control system.
Each mode of switch position is indicated by the LED illumination.
"SET /STOP with Green LED" : Film path is fully open. Holding the film by the finger tips,
beginning at an entrance guide, . pull the film along the slot path as indicated by
the orange arrows. Attaching the film to the take-up reel completes the film loading.
Push the SET /STOP Red Switch.
"SET /STOP with Red LED" : Film path is now closed. The film perforations are engaged with
No. 1 & No. 2 sprockets, and the cam claw. The upper and lower loops are formed.
The PA (Public Address) system can be used at this position.
- 4 -