1-2: Specifications - Eiki ESL SERIES Service Manual

1-2 SPECIFICATIONS
Power Requirement:
Power Consumption:
Lamp:
Hi-Low
Lamp Switch:
Exciter Lamp:
Lens:
Film Speed:
Shutter:
Reel Capacity:
Controls:
Still Picture:
Amplifier:
Power Output:
Tone Controls:
Frequency Response:
Aux Line Out:
Microphone Input:
Speakers:
Wow
&
Flutter:
Elevation:
Operating Temperature
and Humidity:
Weight:
Models available from 100 to 240V AC 50 or 60Hz
430 to 4 70 watts
ESL/SSL models use ELC, 250 watt 24 volt lamps
SSL-OL models use EYK or EWG, 300 watt 120 volt lamps
All models except SSL-OL
4 volt 0.75 amp type BRK
50mm (2") F, 1.2 6 element 160 lines center resolution standard
24 frames/second standard sound speed
2 or 3 blade optional
2000' ( 600m)
Rotary switch models SSL- and SSL-OL, electronic touch control
model ESL
All models except SSL-OL
All solid state
25 watts
RMS,
8 ohm load, models ESL
&
SSL.
15 watts
RMS,
8 ohm load, model SSL-OL
Bass and Treble
50 - 7000Hz
600 ohm un-balance, all models except SSL-OL
Low impedance, un-balanced
10 x 15cm (4 x 6") built in rear cover speaker.
2 x 12.5cm (5") speakers in front cover on optional models
Better than 0.2% weighted
13° maximum
+5°C to +40°C
20% to 90%
(25 to 33 lbs)
11 to 15 kg
- 3 -