Editing Events In The Run Table; Deleting Run Time Events - Agilent Technologies 7820A Advanced User's Manual

2
Programming

Editing events in the run table

Deleting run time events

14
Press [Run Table].
1
Move the cursor to the event you want to change.
2
To edit the time for an event, move the cursor to the line
3
labeled Time:. Type the desired time and press [Enter].
4 To edit a setpoint value, scroll to the setpoint line. Press
[On/Yes] or [Off/No] or enter a numeric value for the
setpoint. Press [Enter].
Press [Run Table].
1
From within this table press [Delete] to delete events from
2
the run time table. You will be asked to confirm the deletion.
Press [On/Yes] to delete the current timed event; press
3
[Off/No] to cancel this operation.
To delete the entire table, press [Delete][Run Table].
4
Advanced User Guide