Editing Clock Time Events; Deleting Clock Time Events - Agilent Technologies 7820A Advanced User's Manual

2
Programming

Editing clock time events

Deleting clock time events

16
Select the event type.
3
Set appropriate parameters.
4
Repeat this process until all entries are added.
5
Press [Clock Table] to view all events programmed.
1
Scroll to the event you want to change.
2
To edit the time for an event, move the cursor to the line
3
labelled Time: and type the desired time.
To edit a setpoint value, scroll to the setpoint item. Press
4
[On/Yes] or [Off/No], or enter a numerical value for the
setpoint.
Press [Clock Table].
1
Use [Delete] to remove events from the clock time table. You
2
will be asked to confirm the deletion.
Press [On/Yes] to delete the current timed event; press
3
[Off/No] to cancel this operation.
To delete the entire table, press [Delete][Clock Table].
Advanced User Guide