Operation With An Agilent Data System - Agilent Technologies 7820A Advanced User's Manual

4
Columns and Oven

Operation with an Agilent data system

64
Using the hydrogen sensor with an Agilent data system provides
additional features. Use the data system to:
• Print calibration reports. The report includes a plot of all
calibration data stored in the GC,
• Access the automated calibration schedule control (on/off).
• Store lot number and expiration date information for the
calibration gas cylinder.
• View the hydrogen sensor status information in the GC
status user interface. The status shows the current percent
hydrogen level and any messages related to the hydrogen
sensor.
• Plot the measured hydrogen level as a diagnostic signal, if
desired.
• View and print all logged entries for calibrations, cylinder
information, and shutdowns.
Advanced User Guide