Table of Contents
Advertisement
2. Preparation
Preparation
2. Preparation
2.1 Controls
2.1.1 Main monitor
Because the main monitor receives power from the lobby station, settings can only be changed when there
are incoming calls and during calls.
The switches on the side of the main monitor can be changed when the main monitor is idle.
A
B
C
D
Buttons and indicators (front)
No.
Item
A
Display
B
Call indicator (
C
Talk indicator (
D
Unlock indicator (
E
Unlock button (M
F
Brightness adjust button
(M
N)
G
Talk/Off button (M
H
Speaker
I
Wide/Zoom button (M
J
Backlight compensation
button (M
N)
K
Microphone
6
E
F
G H
Description
—
Flashes in red when there is an incoming call.
)
Lights in amber during a call.
)
Lights in blue when an electric lock is unlocked.
)
Can unlock electric locks when talking. (page 8)
N)
Can adjust the screen brightness when there is an incoming call or during a
*1
call.
R To adjust the screen brightness, press the button repeatedly to select the
desired setting from the 5 levels.
(page 8)
N)
—
Can display images in wide mode or zoom mode (center, right, or left) when
N)
there is an incoming call or during a call.
R To switch between wide mode and zoom mode, press the button
repeatedly to select the desired setting.
– Wide mode: The full camera image is displayed.
– Zoom mode: Images are displayed 2 times larger than wide display.
Can turn the backlight compensation on or off when there is an incoming call
or during a call.
R To turn the backlight compensation on or off, select the desired setting.
—
K
L
I
J
*1
N
O
P
Q
M
*1, *2
Advertisement
Table of Contents
