Oracle SUN Fire X4640 Diagnostics Manual page 44

Index
ILOM web interface
using to clear faults, 30–31
using to create a data snapshot, 37–39
using to reset the ILOM SP, 41
using to view sensor readings, 23–25
using to view system event log, 26–28
inspecting the server
externally, 12
internally, 12–14
internally inspecting the server, 12–14
introduction to SunVTS diagnostics software, 33
isolating DIMM errors, 17–19
M
monitoring the host using ILOM, 23–32
My Oracle Support, how to use, 5–6
O
overview of diagnostics guide, 7
P
power off procedure, 12
power problems, troubleshooting, 11–12
R
resetting the ILOM SP
using the ILOM command-line interface, 42
using the ILOM web interface, 41
S
sensor readings, 23–32
using the ILOM command-line interface, 25–26
using the ILOM web interface, 23–25
Service Processor ILOM, description, 10
service visit information, gathering, 11
44 Sun Fire X4640 Server Diagnostics Guide • December 2010, Rev A
shutdown procedure, 12
snapshot
creating with the ILOM command-line
interface, 39–40
creating with the ILOM web interface, 37–39
SP SEL, time stamps, 31
SunVTS, description, 10
SunVTS diagnostics software, 33–36
documentation, 34
introduction, 33
using to diagnose problems, 34–36
support.oracle.com, 5–6
system event log, 26
viewing with the ILOM command-line
interface, 28–30
viewing with the ILOM web interface, 26–28
T
temperature sensor readings, 23–32
time stamps in ILOM SP SEL, 31
troubleshooting
DIMM problems, 15–21
guidelines, 11
power problems, 11–12
troubleshooting options, 9
V
voltage sensor readings, 23–32