Oracle SUN Fire X4640 Diagnostics Manual page 25

b. Click the name of the sensor to view the property values associated with that sensor.
For specific details about the type of discrete sensor targets you can access, as well as the
paths to access them, see
If the problem with the server is not evident after viewing sensor readings information,
4
continue with
▼
How to Use the ILOM Command-Line Interface to View the Sensor
Readings
To view sensor readings, you need the Read Only (o) role enabled.
Before You Begin
Log in to the ILOM CLI.
1
Type the following commands to navigate to the sensor target and then to view the sensor
2
properties:
->cd target
->show
For example, on some server platforms, you can specify the following path to view a
temperature reading of a server's ambient air intake:
->cd /SYS/MB/T_AMB0
Sun ILOM 3.0 Supplement for the Sun Fire X4640
"Using SunVTS Diagnostics Software "on page
Viewing the ILOM Sensor Readings
Server.
33.
25