Instruction For Installation - Elba ESO-2633BI Owner's Manual

INSTRUCTION FOR INSTALLATION

1.Warnings for power connection:
-The appliance must be connected in accordance with local electrical regulations.
-The installation must to be carried out only by authorized technician.
-THIS APPLIANCE MUST BE EARTHED.
-Main connection can also be made by fitting a single phase 15 amp earthed switch
with a minimum gap between the contacts of 3mm.
-With earth single phase socket, use the proportionate load complying with the
regulations in force.
2.Before connecting to the mains, make sure that:
-Use 1.5mm² power cable and three-pin fused socket rated at 15A.
-The electricity supply system must be earthed, according to the regulations in force.
-The isolation switch can easily be reached after the steam oven is installed.
-After connection to the electrical mains, check that the supply cable does not
overheat.
-Never use reductions, shunts, or adaptors that can cause overheating or burning.
-The manufacturer shall not liable for any direct or indirect damage caused by faulty
installation. The installer must ensure that the product installation and connection
complies with the local and general regulations in force.
3.Installation and Assembly:
-Fit the appliance into its surround (beneath a work-top) by inserting screws into the
4 holes that can be seen in the frame of the oven when the door is opened.
-3-