Transmitter Settings And Functions
Settings and functions are programmable by entering information into the
Transmitter.
From the Transmitter keypad, press the * key to scroll down through the options.
Press # to select a displayed function.
Press 0 to move up through functions.
If information, other than what is required is entered, the display will show
'Invalid' and then return to 'Enter Pager #. display'
To exit the settings and functions menu, enter ** on the keypad.
Password
To protect system settings, most menu selections are password protected.
The factory default password is "1234." Password can be changed if desired.
Display Screen
"Enter Pager #" is the 'Home Position' of the Transmitter display.
See Password and Change Password? for more information.
Detailed Menu information: Instructions on how to read the menus is as follows:
Information shaded is what will appear on the Transmitter display.
Follow arrows
BOLD Italics is information that needs to be entered on the Keypad.
Enter Pager #
Enter
Pager #
Enter NNNN #
Num
Snd
Enter
Pager
Enter NNN*MMMMMMM#
Num
Snd
Enter Grp #
Enter
Pager #
Enter *
Enter
Grp #
Enter GG
Grp # GG
10
Enter Pager #
to the next step
"Home" position of the transmitter.
Vibe/Tone/Flash Pagers
Numeric Pagers
NNNN
ZZZZ
#
NNNN
ZZZZ
Pages a Group of Pagers (if programmed).
Snd
Enter the Pager number and #.
Enter Pager number, *, optional 16 digit numeric message
and #. If ZZZZ is displayed, shown as 123 in the example.
Ex.
Pager number 2 has been entered in the keyboard, how-
ever Pager 123 is being paged. Pager 2 has been re-
placed with Pager 123. See Replace Pager? For more
information.
To cancel a page before it was sent Enter **.
NNNN =Pager Number
ZZZZ = Replaced Pager
MMMMMMM = Message
See Group for more information.
GG = Group Number
Num 2
Snd
123
Need help?
Do you have a question about the Premises and is the answer not in the manual?