Advertisement
Table of Contents
- 1 Quick Setup
- 2 System Use
- 3 Distributing a Pager
- 4 Setup Is Complete
- 5 System Default Configuration
- 6 Set Current Time
- 7 Turn Pager off
- 8 Search Pagers
- 9 Default Number of Vibes ("Alert Time")
- 10 Out of Range
- 11 Creating Pager Groups
- 12 Frequently Asked Questions
- 13 FCC Licensing Information
- 14 Radio Compliance
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JTECH GuestCall IQ J1705
Summary of Contents for JTECH GuestCall IQ J1705
- Page 1 User Manual GuestCall® IQ Pager 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved. Part Number: MPGIQ-1...
-
Page 2: Quick Setup
User Manual GuestCall Paging, IQ Pagers Model Number: J1705, J1706 Components Your GuestCall ® IQ paging system is comprised of three key elements: > Transmitter (IQ Base & Istation) The GuestCall IQ® Pagers > > The GuestCall IQ Pager Charger Quick Setup >... -
Page 3: System Default Configuration
User Manual GuestCall Paging, IQ Pagers Model Number: J1705, J1706 System Configurations System Default Configuration The paging system was set to default settings listed below prior to shipment. Current time is set. > > Out of Range is set to OFF Audible (voice alert) is set to OFF >... -
Page 4: Default Number Of Vibes ("Alert Time")
User Manual GuestCall Paging, IQ Pagers Model Number: J1705, J1706 Default Number of Vibes (“Alert Time”) This will allow you to change the number of cycles the pager will flash and vibrate. Scroll to DEFAULT # VIBES, press ENTER. > >... - Page 5 User Manual GuestCall Paging, IQ Pagers Model Number: J1705, J1706 Range Test Turning this feature on and walking around with your pagers will give you an idea of the range of your transmitter. Transmitter will send a signal to the pagers for this range test. Pagers will light up each time that the pagers receive the message from the transmitter.
- Page 6 Paging with Host Concepts™ Waitlist Application Users of Host Concepts can page JTECH branded pagers directly within the application by adding an ISTATION connected transmitter to the Wi-Fi network that Host Concepts is connected to, such as a Guest Network in the restaurant.
-
Page 7: Frequently Asked Questions
What is the expected battery life? Can I buy replacements? JTECH batteries should last up to 2 years with proper use. Try charging the pager before considering replacement batteries. If after 4 hours the pager charging light still displays amber, contact JTECH to order replacement batteries. -
Page 8: Fcc Licensing Information
Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements... -
Page 9: Radio Compliance
User Manual GuestCall Paging, IQ Pagers Model Number: J1705, J1706 Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE. MODIFICATION OR CHANGES NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Need help?
Do you have a question about the GuestCall IQ J1705 and is the answer not in the manual?
Questions and answers