JTECH Premises Installation, Programming And Operator Manual page 11

Send All Call
Enter
Pager #
Enter ***1234**#
Sending
All Call
Send All Call
Enter
Pager #
Enter 9998#
Sending
All Call
Default # of Vibes?
Enter
Pager #
Enter ***1234***#
#Alerts=
(1-5)? A
Enter A
#Alerts=
(1-5) A
Out Of Range (ON)
Enter
Pager #
Enter ***1234****#
Out Of
Rng On?
Enter #
Out Of Range (OFF)
Enter
Pager #
Enter ***1234****#
Out Of
Rng Off?
Enter #
12
Sends a page to all Pager at the same time.
Num
Snd
Num
Snd
Adjusts the number of alerts the Pager produces.
Turns ON/OFF the Out of range function of the transmitter.
Works with:
InstaCall Vibe/Tone Pagers.
Glowster Pagers.
CommPass Pagers.
PatronPass Pagers.
ParentPass Pagers.
PeoplePass Pagers.
Command can also be found in the menu functions.
Works with:
Glowster Pagers.
CommPass Pagers.
PatronPass Pagers.
ParentPass Pagers.
PeoplePass Pagers.
Allows user to change set the number of alerts from 1 to 5
(factory default is 3).
See Multi Vibe Page 16 for additional information.
A = Programmed # of Vibes 1-5
Works with:
Glowster Pagers.
CommPass Pagers. ParentPass Pagers.
When Out Of Range is ON, the Transmitter sends a signal
every 10 seconds.
If Out Of Range is ON, any Pager moved outside the
Transmitter paging range will respond with a Out Of Range
Tone or Voice message if available).
When the Pager is brought back within Transmitter range
the Out Of Range Tone or Voice message (if available) will
stop.
See Range Testing to identify maximum Transmitter range.
Command can also be found in the menu functions.
Also use 9996# to turn Out Of Range ON.
Also use 9997# to turn Out Of Range OFF.
PatronPass Pagers.