Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JTECH J1703
Summary of Contents for JTECH J1703
- Page 1 User Manual Model Number: J1703, J1704 User Manual Date: 8/23/2017 Rugged Pagers 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved. Part Number: MPGCP-1...
-
Page 2: Quick Setup
User Manual GuestCall Paging, Rugged Pagers Model Number: J1703, J1704 Components Your paging system is comprised of three key elements: > Istation Transmitter > The Rugged Belt Pagers The Rugged Pager Charger > Quick Setup Lock the antenna to the connector on the transmitter by placing the antenna on the connector and twisting >... -
Page 3: System Default Configuration
User Manual GuestCall Paging, Rugged Pagers Model Number: J1703, J1704 System Default Configuration The paging system was set to default settings listed below prior to shipment. Current time is set. > > Out of Range is set to OFF >... -
Page 4: Out Of Range
User Manual GuestCall Paging, Rugged Pagers Model Number: J1703, J1704 Select the number of vibrations for that transmitter location, press ENTER to save. > Out of Range With this feature, the pagers will signal (beep or voice) when taken out of range of the transmitter to inform the guest that they are too far away and will miss their page. - Page 5 User Manual GuestCall Paging, Rugged Pagers Model Number: J1703, J1704 Range Test Turning this feature on and walking around with your pagers will give you an idea of the range of your transmitter. Transmitter will send a signal to the pagers for this range test. Pagers will light up each time that the pagers receive the message from the transmitter.
- Page 6 User Manual GuestCall Paging, Rugged Pagers Model Number: J1703, J1704 Smart Charger Re-Programming With the Smart Charger, you can renumber pagers back into sequential order as well as ensure that all pagers have the same configuration. Program Pagers The pagers will be set to the programming applied prior to shipping as well as renumbering the pagers into sequential order.
- Page 7 Paging with Host Concepts™ Waitlist Application Users of Host Concepts can page JTECH branded pagers directly within the application by adding an ISTATION connected transmitter to the Wi-Fi network that Host Concepts is connected to, such as a Guest Network in the restaurant.
-
Page 8: Frequently Asked Questions
What is the expected battery life? Can I buy replacements? JTECH batteries should last up to 2 years with proper use. Try charging the pager before considering replacement batteries. If after 4 hours the pager charging light still displays amber, contact JTECH to order replacement batteries. -
Page 9: Fcc Licensing Information
Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements... -
Page 10: Radio Compliance
User Manual GuestCall Paging, Rugged Pagers Model Number: J1703, J1704 Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE. MODIFICATION OR CHANGES NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Need help?
Do you have a question about the J1703 and is the answer not in the manual?
Questions and answers