Subscribe to Our Youtube Channel
Related Manuals for JTECH GuestCall IQ
Summary of Contents for JTECH GuestCall IQ
- Page 1 GuestCall IQ® All in One Paging System 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved.
-
Page 2: Transmitter Overview
User Manual IQ All in One Model Number: IQAIO Transmitter Overview Charging Jack for USB Connector additional charging base (Not used on this system) Pager Charging Slots DC Jack for BNC Connector for power supply Antenna LCD Display Paging System Setup Base Station and Charging Unit Setup 1. -
Page 3: Transmitter Operation
User Manual IQ All in One Model Number: IQAIO Transmitter Operation ® The GuestCall All in One IQ system is plug and play ready. After the proper connections are made, the system will be ready for use. Pagers will quick charge to full capacity in only two hours. Default Set-Up ... - Page 4 User Manual IQ All in One Model Number: IQAIO MENU OPTIONS Set the Current Time 1. At the “Set Current Time” menu, press the “ENTER” key. 2. Set the hour, then press the “ENTER” key. 3. Set the minutes, then press the “ENTER” key. 4.
- Page 5 NOTE: The transmitter has an auto shut off feature that will stop the range test after 15 minutes. Programming the Pager Number This feature only works with the JTECH IQ Pager with digital display. Be sure that all pagers are returned before performing this procedure.
- Page 6 User Manual IQ All in One Model Number: IQAIO 5. After setting the duty alert function, press, “enter”. Display will show “Duty _ _ saved”. 6. Press the “# /Select” to go the second pager or “CANCEL” twice to exit the system- programming menu. Follow the procedure above to program the next pager.
-
Page 7: Frequently Asked Questions
How long will my pager batteries last and how do I replace them? JTECH an HME Company uses the finest rechargeable NiMh batteries available. They should last 3-5 years. When they need to be replaced, the pager will display “LO” (only with IQ Pager) after being charged for at least 2 hours. -
Page 8: Customer Service
4. *Make certain your company information is in the box and on the return label – especially if you ship from a Pack & Ship store. 5. Ship the equipment in a traceable manner for your protection. (I.e. UPS Ground Track). JTECH an HME Company is not responsible for packages lost in transit. Save the tracking number! 6. - Page 9 User Manual IQ All in One Model Number: IQAIO Paging Hints and Tips Make sure Out of Range is turned on. Should the guest / patron travel outside the range of the host sending unit the system will alert them to come back closer or they will miss their page.
-
Page 10: Fcc Licensing Information
Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements... -
Page 11: Radio Compliance
User Manual IQ All in One Model Number: IQAIO Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE. MODIFICATION OR CHANGES NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Need help?
Do you have a question about the GuestCall IQ and is the answer not in the manual?
Questions and answers