Subscribe to Our Youtube Channel
Related Manuals for JTECH GuestCall CommPass J1701
Summary of Contents for JTECH GuestCall CommPass J1701
- Page 1 User Manual GuestCall® CommPass Pagers 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved. Part Number: MPGCP-1...
-
Page 2: Quick Setup
User Manual GuestCall Paging, CommPass Pagers Model Number: J1701, J1702 Components Your GuestCall ® CommPass paging system: > IQ Base / ISTATION Transmitter > The CommPass Pagers The CommPass Charger > Quick Setup Lock the antenna to the connector on the transmitter by placing the antenna on the connector and twisting >... -
Page 3: System Configurations
User Manual GuestCall Paging, CommPass Pagers Model Number: J1701, J1702 Distributing a Pager > Remove a CommPass pager from the charger. > The pager will flash and vibrate to preview what the alert will look like for the guest. > Hand the pager to the guest, stating that the pager will go off with they have been paged. - Page 4 User Manual GuestCall Paging, CommPass Pagers Model Number: J1701, J1702 Press the ENTER key to edit the time to turn the pager off. > > Set the hour then press ENTER key. > Set the minutes and press ENTER key. >...
- Page 5 User Manual GuestCall Paging, CommPass Pagers Model Number: J1701, J1702 Scroll to REMOVE PAGER TO GROUP menu then press ENTER. > > Enter the Group Number followed by ENTER. > Enter the Pager Number you want to remove from this group. >...
- Page 6 User Manual GuestCall Paging, CommPass Pagers Model Number: J1701, J1702 Range Test Turning this feature on and walking around with your pagers will give you an idea of the range of your transmitter. Transmitter will send a signal to the pagers for this range test. Pagers will light up each time that the pagers receive the message from the transmitter.
- Page 7 Paging with Host Concepts™ Waitlist Application Users of Host Concepts can page JTECH branded pagers directly within the application by adding an ISTATION connected transmitter to the Wi-Fi network that Host Concepts is connected to, such as a Guest Network in the restaurant.
-
Page 8: Frequently Asked Questions
What is the expected battery life? Can I buy replacements? JTECH batteries should last up to 2 years with proper use. Try charging the pager before considering replacement batteries. If after 4 hours the pager charging light still displays amber, contact JTECH to order replacement batteries. -
Page 9: Fcc Licensing Information
Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements... -
Page 10: Radio Compliance
User Manual GuestCall Paging, CommPass Pagers Model Number: J1701, J1702 Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE. MODIFICATION OR CHANGES NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Need help?
Do you have a question about the GuestCall CommPass J1701 and is the answer not in the manual?
Questions and answers