JTECH J1703 User Manual

Rugged Smart Charger Re-Programming

With the Smart Charger, you can renumber pagers back into sequential order as well as ensure that all pagers have
the same configuration.

Program Pagers - Auto-program Pagers 1-12

The pagers will be set to the programming applied prior to
shipping as well as renumbering the pagers into sequential
order.
> First position, indicated by the location with the ,
will be renumbered to the number shown on the
charger's display
> Pagers will renumber based on their position in the
charger, image at right.
> To activate the programming cycle.
o PRESS and HOLD the PROG button on the
charger for eight (8) seconds.
o Charger will beep twice indicating that the
cycle has begun.
o You will see the pagers perform several
functions as it applies each of the pager
configurations. When the process is
complete, all pagers will be in sequential order.
NOTE: Replacements for lost pages will arrive with the number 888
>
on the display.

Replacement of Lost Pagers

Replacements for lost pagers will arrive with the number
display.
>
Place new pagers into the charger in any location and use the PROG function listed above to have them work
with your existing system.
800.321.6221
Rugged Pager Number Reprogramming
8 8 8
on the
User Manual
Model Number: J1703, J1704
5