Advertisement

User Manual
GuestCall® Coaster Pager
800.321.6221
©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved.
Part Number: MPGCST-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GuestCall Coaster J1707 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for JTECH GuestCall Coaster J1707

  • Page 1 User Manual GuestCall® Coaster Pager 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved. Part Number: MPGCST-1...
  • Page 2: Quick Setup

    User Manual GuestCall Paging, Coaster Pagers Model Number: J1707, J1708 Components Your GuestCall ® Coaster paging system is comprised of: > Transmitter (IQ Base / Istation) > The GuestCall Coaster Pagers The GuestCall Coaster Pager Charger > Quick Setup Lock the antenna to the connector on the transmitter by placing the antenna on the connector and twisting >...
  • Page 3 User Manual GuestCall Paging, IQ Pagers Model Number: J1705, J1706 System Default Configuration The paging system was set to default settings listed below prior to shipment. Current time is set. > > Out of Range is set to OFF > Audible (voice alert) is set to OFF To enter programming mode, on the transmitter, press SETUP, use password 1379 and press ENTER.
  • Page 4 User Manual GuestCall Paging, Coaster Pagers Model Number: J1707, J1708 Select the number of vibrations for that transmitter location, press ENTER to save. > Out of Range With this feature, the pagers will signal (beep or voice) when taken out of range of the transmitter to inform the guest that they are too far away and will miss their page.
  • Page 5 User Manual GuestCall Paging, Coaster Pagers Model Number: J1707, J1708 Range Test Turning this feature on and walking around with your pagers will give you an idea of the range of your transmitter. Transmitter will send a signal to the pagers for this range test. Pagers will light up each time that the pagers receive the message from the transmitter.
  • Page 6 Paging with Host Concepts™ Waitlist Application Users of Host Concepts can page JTECH branded pagers directly within the application by adding an ISTATION connected transmitter to the Wi-Fi network that Host Concepts is connected to, such as a Guest Network in the restaurant.
  • Page 7: Frequently Asked Questions

    What is the expected battery life? Can I buy replacements? JTECH batteries should last up to 2 years with proper use. Try charging the pager before considering replacement batteries. If after 4 hours the pager charging light still displays amber, contact JTECH to order replacement batteries.
  • Page 8: Fcc Licensing Information

    Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements...
  • Page 9: Radio Compliance

    User Manual GuestCall Paging, Coaster Pagers Model Number: J1707, J1708 Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE. MODIFICATION OR CHANGES NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This manual is also suitable for:

Guestcall coaster j1708

Table of Contents