Table of Contents
Related Manuals for JTECH ServerCall J1703
Summary of Contents for JTECH ServerCall J1703
- Page 1 User Manual Model Number: J1703, J1704 User Manual Date: 05/09/2017 ServerCall® Paging w/Rugged Staff Pagers 800.321.6221 ©2017 JTECH, an HME Company logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved. Part Number: MPGRG-1...
-
Page 2: Quick Setup
Model Number: J1703, J1704 Components Your ServerCall ® paging system is comprised of three key elements: > The JTECH ServerCall Transmitter > The Rugged Staff Pagers The Rugged Pager Charger > Quick Setup Mount the ServerCall transmitter to the cook line using the included brackets. Bracket can also be used as a >... -
Page 3: System Configurations
User Manual ServerCall Paging, Rugged Staff Pagers Model Number: J1703, J1704 Re-Page Feature By default, Servers will be paged 3 times before the page is escalated. Each page is indicated by a colored LED on the transmitter. GREEN – 1st page has been sent to server >... - Page 4 User Manual ServerCall Paging, Rugged Staff Pagers Model Number: J1703, J1704 Transition Page (Default: 30 seconds) The transition page is the time between Re-Page. There are three options: > Page the server 1x and reset. Page the server 3x. > >...
- Page 5 User Manual ServerCall Paging, Rugged Staff Pagers Model Number: J1703, J1704 Range Test Turning this feature on and walking around with your pagers will give you an idea of the range of your transmitter. Transmitter will send a signal to the pagers for this range test. Pagers will light up each time that the pagers receive the message from the transmitter.
- Page 6 User Manual ServerCall Paging, Rugged Staff Pagers Model Number: J1703, J1704 Smart Charger Re-Programming With the Smart Charger, you can renumber pagers back into sequential order as well as ensure that all pagers have the same configuration. Program Pagers The pagers will be set to the programming applied prior to shipping as well as renumbering the pagers into sequential order.
-
Page 7: Frequently Asked Questions
What is the expected battery life? Can I buy replacements? JTECH batteries should last up to 2 years with proper use. Try charging the pager before considering replacement batteries. If after 4 hours the pager charging light still displays amber, contact JTECH to order replacement batteries. -
Page 8: Fcc Licensing Information
Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact JTECH, an HME Company, or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use JTECH, an HME Company’s, FCC license or obtain your own, you are responsible for complying with the FCC rules and requirements... -
Page 9: Radio Compliance
User Manual ServerCall Paging, Rugged Staff Pagers Model Number: J1703, J1704 Radio Compliance (Applies only to users in the United States) THESE DEVICES COMPLY WITH PARTS 90 AND 15 OF THE FCC RULES, AS APPLICABLE. OPERATION IS SUBJECT TO THE CONDITION THAT THE DEVICES DO NOT CAUSE HARMFUL INTERFERENCE.
Need help?
Do you have a question about the ServerCall J1703 and is the answer not in the manual?
Questions and answers
Que distancia de alcance tiene?
The context does not specify the exact range distance of the JTECH J1703. It only mentions that you can perform a range test by turning on the feature and walking around with the pagers to determine the transmitter's range. Therefore, the specific range distance cannot be determined from the provided information.
This answer is automatically generated