Drive Cage - HP ProDesk 680 G3 MT Maintenance And Service Manual

Drive cage

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Disconnect all cables to drives installed in the drive cage (see
on page
4. Lift the rear edge of the drive cage (1) to disengage the cage from the computer chassis.
5. Slide the drive cage (2) toward the rear panel.
6. Remove the drive cage (3).
Reverse this procedure to install the drive cage.
36 Chapter 4 Removal and replacement procedures
Access panel on page
33).
Preparation for disassembly on page
21).
Hard drives on page 30
20).
and Optical drives