Download Print this page
HP ProDesk 680 G6 PCI Disassembly Instructions Manual

HP ProDesk 680 G6 PCI Disassembly Instructions Manual

Microtower pc end-of-life disassembly

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP ProDesk 680 G6 PCI Microtower PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking
code on the plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more
than one is provided with the product (such as a
detachable notebook keyboard battery, RTC coin
cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
All types including standard alkaline, coin or button
style batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[X] snaps
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
AcBel 550W EPA92 PSU
HPI instructions for this template are available at
HP's Sustainability
] screws
] adhesive
] other. Explain
Power Cord
EL-MF877-01
Contact.
Quantity
of items
included
in product
3
1
1
1
Page 1

Advertisement

loading

Summary of Contents for HP ProDesk 680 G6 PCI

  • Page 1 Marketing Name / Model [List multiple models if applicable.] HP ProDesk 680 G6 PCI Microtower PC Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Quantity of items Item Description Notes included in product already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers...
  • Page 3 25. Remove the battery from the system board. 26. Remove Graphic card from MB. 27. Remove M.2 SSD Card. 28. Remove M.2 WLAN Card. 29. Remove Antenna cable. 30. Remove speaker from Chassis. 31. Use T-15 screwdriver remove the screws on the PSU Chassis. 32.
  • Page 4 Step5 Remove front bezel from chassis Step6 Remove the screw of strengthen beam Step7 Remove the strengthen beam from chassis Step 8 Remove the ODD cage EL-MF877-00 Page 4 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 5 Step9 Disconnect HDD power cable and HDD SATA Step10 Use T-15 screwdriver to loose the screws of HDD cage cable from HDD Step11 Remove HDD from Chassis Step12 Remove HDD from HDD cage Step 13 Disconnect all SATA data cables from MB Step14 Disconnect P3 cable from MB EL-MF877-00 Page 5...
  • Page 6 Step15 Disconnect CPU/ODD Power cables from MB Step16 Disconnect system fan cable from MB Step17 Use PH1 screwdriver to remove system fan from Step18 Disconnect cooler fan cable from MB chassis Step19 Use T-15 screwdriver to loose the screws and Step20 Use PH1 screwdriver to loose the screws and remove remove cooler the fan...
  • Page 7 Step21 Separate the fan from cooler Step22 Remove memory from MB Step23 Rotate the handle and open it up Step24 Remove the CPU from the board EL-MF877-00 Page 7 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 8 Step25 Remove the battery from the system board Step26 Remove Graphic card from MB Step27 Remove M.2 SSD Card Step28 Remove M.2 WLAN Card Step29 Remove Antenna cable Step30 Remove speaker from Chassis EL-MF877-00 Page 8 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 9 Step31 Use T-15 screwdriver remove the screws on the PSU Step32 Disconnect the PSU cable from the MB Chassis Step33 Press the PSU latch on chassis Step34 Remove the PSU from chassis Step35 Use T-15 screwdriver to loose the screws of MB Step36 Remove MB from chassis EL-MF877-00 Page 9...
  • Page 10 Step37 Use PH1 screwdriver to remove screw for the PSU Step38 Remove PSU cover Step39 Use PH1 screwdriver to remove FG screw and remove Step40 Disconnect fan connector and inlet connector Step41 Loose screws and remove PCA from case Step42 Use PH1 screwdriver to remove AC inlet & Fan screw EL-MF877-00 Page 10...
  • Page 11 Step43 Heat the solder of the Electrolytic Capacitors of greater than 2.5cm in diameter or height and Remove it EL-MF877-00 Page 11 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...