HP ProDesk 680 G3 MT Maintenance And Service Manual page 39

7. Slide the 2.5-inch hard drive to the left as far as it will go, and then remove the 2.5-inch hard drive (3).
Follow these steps to remove a 3.5-inch hard drive:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Position the computer with the rear panel toward you.
4. Disconnect the hard drive power cable (1) from the 3.5-inch hard drive.
5. Disconnect the hard drive data cable (2) from the 3.5-inch hard drive.
Preparation for disassembly on page
Access panel on page 21).
20).
Hard drives 31