Fan - HP ProDesk 680 G3 MT Maintenance And Service Manual

Fan

Follow these steps to remove the speaker:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Position the computer with the rear panel toward you.
4. Disconnect the fan cable (1) from the system board.
5. Remove the three Phillips PM4.8×12.2 screws (2) that secure the fan to the computer chassis.
6. Remove the fan (3).
Reverse this procedure to install the fan.
Preparation for disassembly on page
Access panel on page 21).
20).
Fan 29