Error Messages - KERN KFE-TM Operating And Installation Instructions

9.4 Error messages

Error
message
- - - - ­
Maximum load exceeded
- - ol - ­
Err 1 Incorrect data input
Err 2 Incorrect time entry
Err 4 Zeroing range exceeded due
to switching-on balance or
pressing
(normally 4% max)
Err 5 Keyboard error
Err 6 Value outside the A/D
changer range
Err 9 Stability display does not
appear
Err 17 Taring range exceeded
Fai l h /
Adjustment error
Fai l l
Ba lo /
Battery very low
Lo ba
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
KFE-TM-BA_IA-e-1313
Description Possible causes
Unload weighing system or reduce
preload.
Follow format "yy:mm:dd"
Follow format "hh:mm:ss"
Object on the weighing plate
Overload when zeroing
Weighing plate not installed
Damaged weighing cell
Damaged electronics
Check the environmental
conditions.
Reduce load
Repeat adjustment.
Recharge battery
29