File Access via the CamExpert Tool
1. Click on the "Setting..." button to show the file selection menu.
2. From the Type drop menu, select the file type that will be uploaded to the camera.
3. From the File Selector drop menu, select the camera memory location for the uploaded data. This menu
presents only the applicable data locations for the selected file type.
4. Click the Browse button to open a typical Windows Explorer window.
5. Select the specific file from the system drive or from a network location.
6. Click the Download button to execute the file transfer from the Falcon4.
7. Note that firmware changes require a device reset command.
40 • Falcon 4 Camera User's Manual
Figure 18 Initial File Access Control Dialog
Camera Operation