Saving And Restoring Camera Settings - Teledyne Falcon4 57M User Manual

Saving and Restoring Camera Settings

The Power-up Configuration parameter opens a dialog allowing you to specify the camera
configuration to use on power up and to save current parameter settings.
When the user changes a camera parameter, the settings are stored in the camera's volatile
memory and will be lost if the camera resets or is powered down. To save these settings for reuse,
they must be saved to the camera's non-volatile memory using the User Set Save parameter.
Previously saved user setting (User Set 1 to 3) or the factory settings can be restored using the
User Set Selector and User Set Load parameters.
Either the Factory or one of the User settings can be specified as the Default Set by selecting it in
the User Set Default Selector. The chosen set is automatically loaded when the camera is reset or
powered up. It should also be noted that the value of Default Selector will automatically get save in
non-volatile memory whenever it is changed.
The relationship between these three settings is illustrated in Figure 8.
Falcon 4 Camera User's Manual • 25
Camera Operation