Table of Contents
Advertisement
Models
The camera is available in the following configurations.
Model Number
Description
FA-S0-57M16-00-R
57M pixel monochrome, Camera Link HS.
Software
Camera firmware
GenICam™ support (XML camera description file)
Recommended: Sapera LT, including CamExpert GUI application and
GenICam for Camera Link imaging driver.
Camera Performance Specifications
Specifications
Resolution
Pixel Rate
Max. Frame Rate
Pixel Size
Bit Depth
Exposure Time
Dynamic Range Mono**
Operating Temp
Connectors and Mechanicals
Size
Mass
Data Interface
Power Connector
Power Supply
Power Dissipation
Lens Mount
Sensor Alignment
Compliance
Regulatory Compliance
Mono Operating Ranges
Random Noise
Responsivity
DC Offset
4 • Falcon 4 Camera User's Manual
Table 1: Camera Models Overview
Table 2: Software
Table 3: Camera Performance Specifications
Performance
7168(H) x 8064 (V)
1.37 Gpixel / s
16 fps
6 µm x 6 µm
12 bits, Camera Link HS
100 µs minimum
59 dB (monochrome) (Global Shutter)
65 dB (monochrome) (Rolling Shutter)
0 °C to 50 °C, front plate temperature
100 mm (H) x 100 mm (W) x 80.5 mm (D)
< 1 kg
CLHS—single C2 7M1, CX4 connector
Hirose 12-pin circular
+ 12 V to + 24 V DC
< 35 W
M95 x 1
± 100 µm in X-Y directions
CE and RoHS
Units
DN rms
DN/(nJ/cm2)
DN
Product Number / Version Number
Embedded within camera
Embedded within camera
Version 7.50 or later
4.6(GS), 2.3(RS)
See graph
The Falcon4 Camera Overview
Notes
Typical, FFC disabled
Figure 1.
FFC enabled
Advertisement
Table of Contents
