Danfoss VLT HVAC Drive FC 102 Design Manual page 138

How to Install
Terminal Locations - E1
Take the following position of the terminals into consideration when designing the cable access.
5 5
492[19.4]
323[12.7]
B
195[7.7]
Figure 5.67 IP21 (NEMA Type 1) and IP54 (NEMA Type 12) Enclosure Power Connection Positions
B Front View of Unit
Table 5.54 Legend to Figure 5.67
136
Design Guide
Danfoss A/S © Rev. 2014-01-13 All rights reserved.
0[0.0]
MG16C122