Table of Contents
Advertisement
This appendix provides the technical specifications for your server unit.
Server Unit
Table B-1 lists the server unit technical specifications.
Table B-1. Server Unit Technical Specifications
Item
Chassis
Dimensions
Weight
Enclosure
Environment
Peripheral Interface (rear access)
Peripheral Interface (front access)
Option PCI Slots
Storage Device Capacity
System Board
Processor
Cache
B-2 Technical Specifications
Specification
Width:
17.0 inches (432 mm)
Height: 3.5 inches (89 mm)
Depth: 26.0 inches (660 mm)
Approximately 65 lbs. (29.25 kg)
19-inch rack mountable (3U)
Temperature: 50° to 86°F (10° to 30°C)
Relative humidity: 20% to 80% (non-condensing)
PS/2 style (6-pin mini-DIN) keyboard connector
PS/2 style (6-pin mini-DIN) mouse connector
Two USB (4-pin) port connectors
Two serial (9-pin) port connectors
Parallel printer (25-pin) port connector
RJ-45 T/10Base-T/100Base Ethernet port connector
SVGA (15-pin) port connector
Wide-SCSI device (68-pin) port connector
One serial (9-pin) port connector
Three 64-bit PCI bus (33 MHz) slots
One 32-bit PCI bus (33 MHz) slot
One CD-ROM drive
One 3 1/2-inch floppy diskette drive
Up to one 5 1/4-inch removable device
Hot-swap SCSI hard disk drive bays for installing up to five SCSI hard
disk drives (four SCSI hard disk drives if a 51/4-inch removable device
is installed
®
®
™
Intel
Pentium
III Xeon
Processor
Clock rate: 733/933 MHz Bus speed: 133MHz
Primary:
Integrated 16KB (L1) cache memory
Secondary:
256 MB (L2) cache memory
Advertisement
Table of Contents
Troubleshooting
