Making Connections - NEC EXPRESS5800/120Rc-2 Service Manual

Making Connections

If your system normally operates without a video display or keyboard (for
example, as a network server), you must install a video display and keyboard to
configure the system. You may remove them after running the BIOS Setup
Utility. For information on running the BIOS Setup Utility, refer to Chapter 3
"Configuring Your System" of this User's Guide.
Refer to Figure 2-20 and connect your keyboard, monitor, and mouse. Connect
any external peripheral devices such as a printer or modem by following the
instructions included with these devices. Refer to the next section of this chapter
before connecting the power cord to your server.
Damage to the system may result if the keyboard/mouse
cable is inserted or removed when power is applied to the
system. Inserting a telephone line connector into a LAN
board RJ-45 port may result in personal injury and
equipment damage.
! CAUTION
Setting Up the System 2-23