Changing Boiler Settings - REMEHA Avanta Exclusive 28C Users Operation Instructions & Important Warranty Information

4. Changing boiler settings

4 CHANGING BOILER SETTINGS
2x
2x
R000188-A
2x
2x
R000189-A
2x
2x
R000190-A
6
1. Changing P1 setting: flow temperature of water in central heating system
Reduce the flow temperature as follows:
• Press the f-key until the W symbol flashes in the menu bar.
• Select the users menu using the S-key. p[1 is displayed with 1 flashing.
• Press the S-key a second time. The value 75°C appears and flashes.
• Change the value by pressing the [+] or [-] key. In this example, use the [-]-key to
change the value to 70°C.
• Confirm the value with the S-key. p[1 is displayed with 1 flashing.
• Press 2 times on the >-key to return to the current operating mode.
2. Changing P2 setting: domestic hot water temperature
Increase the domestic hot water temperature as follows:
• Press the f-key until the W symbol flashes in the menu bar.
• Select the users menu using the S-key. p[1 is displayed with 1 flashing.
• Press the [+]-key. p[" is displayed with " flashing.
• Press the S-key a second time. The value 55°C appears and flashes.
• Change the value by pressing the [+] or [-] key. In this example, use the [+]-key
to change the value to 65°C.
• Confirm the value with the S-key. p[2 is displayed with 2 flashing.
• Press 2 times on the >-key to return to the current operating mode.
3. Changing P3 setting: boiler regulation (domestic hot water and central
heating mode)
0 = CH
/ DHW
off off
1 = CH
/ DHW (factory setting)
on on
2 = CH
/ DHW
on off
3 = CH
/ DHW
off on
Change the boiler regulation as follows:
• Press the f-key until the W symbol flashes in the menu bar.
• Select the users menu using the S-key. p[1 is displayed with 1 flashing.
• Press the [+]-key several times. p[3 is displayed with 3 flashing.
• Press the S-key a second time. The setting 1 appears and flashes.
• Change the setting by pressing the [+] or [-] key. In this example, use the [+]-key
to change the setting to 2 (CH
• Confirm the value with the S-key. p[3 is displayed with 3 flashing.
• Press 2 times on the >-key to return to the current operating mode.
Remeha is a licensed member of the Benchmark Scheme which aims to improve the standards
of installation and commissioning of domestic heating and hot water systems in the UK and to
encourage regular servicing to optimise safety, efficiency and performance.
Benchmark is managed and promoted by the Heating and Hotwater Industry Council.
For more information visit www.centralheating.co.uk
Remeha Avanta Exclusive
/ DHW ).
on off
126582-160412