Problems With Boiler And/Or Central Heating System - REMEHA Avanta Exclusive 28C Users Operation Instructions & Important Warranty Information

2. Problems with boiler and/or central heating system

2 PROBLEMS WITH BOILER AND/OR CENTRAL HEATING SYSTEM
Check water
e[01
pressure: water
pressure is
e[02
greater or equal
to 1 bar.
e[07
e[09
e[10
Check water
pressure: water
pressure is
lower than 1
bar.
Check yellow
e[04
gas valve,
bottom boiler,
gas valve
must be in
line with gas
supply pipe, if
necessary open
gas valve.
4
Error codes – errors which can be resolved by the user
Bar
Press
J-key
Top up
Press
your central
J-key
heating
system
Bar
Press Wait for recovery;
J-key
display shows 0,
boiler functions
properly.
LT.NL.W6H.000.114 + LT.NL.W6H.000.116 + LT.AL.W7H.000.230 + LT.AL.W7H.000.235 +
R000184-A + R000185-A + R000186-A + R000187-A
Error codes – errors which have to be remedied by the installer
If the display indicates a different error code from that described above, note down the
error code and boiler type and call your installer. Contact your installer also in the event of
a water leak.
Or
Wait for recovery;
display shows 0,
boiler functions
properly.
Bar
Or
Wait for recovery;
display shows 0,
boiler functions
properly.
Or
Remeha Avanta Exclusive
Display shows e[01, e[02,
e[07 or e[10 again; note
down the error code and boiler
type and call your installer
Display shows e[01, e[02,
e[07 or e[10 again; note
down the error code and boiler
type and call your installer
Display shows e[04 again:
note down the error code and
boiler type and call your installer.
126582-160412