Table of Contents
Advertisement
Wireless Change Frequency
Wireless Frequency Change is a feature that allows
VV-898 transceivers to be programmed with new
frequency information remotely. In other words, one
master transceiver can program several deployed
transceivers in the field by sending the appropriate
commands over the air.
Consider the following example:
A team bought 10 transceivers. One is used at the
home office, while the other nine are installed in
company cars. The home office needs to add a new
communications channel to all deployed radios. Thus,
the staff at the home office may use Wireless
Frequency Change to program all the radios remotely
without having to do them one at a time and without
having to recall them back to the home office for
programming.
Refer to details as following:
1) First, all transceivers should have Wireless
Frequency Change enabled on all 10 transceivers
ahead of time. This is accomplished using the
programming software. Additionally, set a 1-15
digit activation code using DTMF digits 0-9 plus *,
#, A, B, C, and D.
2) Program one of the programmable shortcut keys to
OFF, so that it can be used to access the Wireless
49
Advertisement
Table of Contents
