Table of Contents
Advertisement
Chapter 3 — Develop and Install RFID Applications
Read RFID Tags Through the Demo Application
Send BRI Commands
46
Use the demo application to verify that your reader can read RFID tags.
1
Log in to the web browser interface and click Edgeware
Applications > Application Control. The Application Control
screen appears.
2
If the Developer Tools are not enabled, click
3
Click Developer Tools > Reader Demo.
4
Place a tag near the antenna and then click Start.
Use the Developer Tools to easily send BRI commands through the web
browser interface.
1
Log in to the web browser interface and click Edgeware
Applications > Application Control. The Application Control
screen appears.
2
If the Developer Tools are not enabled, click
.
.
IF1 Fixed RFID Reader User Manual
Advertisement
Table of Contents
