Reading Rfid Tags - Honeywell IH25-0 User Manual

Reading RFID Tags

1. Turn on power to the reader. It will beep one time.
2. Power on the mobile terminal and launch the HONRFID app. Tap
3. Press the MODE button and release within three seconds to check IH25's
4. Press the trigger button to read tags.
Note
IH25 Bluetooth UHF RFID Reader
top corner of Connect screen and select Barcode Way then scan the QR code on
the label attached at the bottom of the reader's main body.
operation mode. If RFID LED lights up, IH25 works in RFID mode. If 1D/2D LED
lights up, it means IH25 works in Barcode mode. Press and hold the MODE button
for at least three seconds to switch to RFID mode.
•
The Barcode Way is only supported by Honeywell's mobile device. See Connect
on page 11 for other connection methods.
•
Make sure to switch on the Bluetooth function and Location (Settings >
Security & location > Location) on the mobile device before connecting.
Otherwise, the connection will fail.
•
RFID tags can be read when they are in range. The range (typically 0.2ft—20ft)
at which a tag can be read depends on the tag type and size and the number of
tags in the field.
on the right
7