How To Manage Applications; Start An Application; Stop An Application; Uninstall An Application - Honeywell 1026FF02F9 User Manual

How to Manage Applications

Start an Application

Stop an Application

Uninstall an Application

Auto-Start an Application at Boot Time

IF1 Fixed RFID Reader User Manual
To maximize resources, you can start, stop, or uninstall applications on
the reader.
By default, an application is stopped. You can start the application from
the web browser interface.
1
Log in to the web browser interface and click Edgeware
Applications > Application Control. The Application Control
screen appears.
2
Click to start an application.
Stop an application from running to reduce the amount of resources that
the reader is using.
1
Log in to the web browser interface and click Edgeware
Applications > Application Control. The Application Control
screen appears.
2
Click to stop an application.
Uninstall an application that you are not using to free up storage space
on the reader.
1
Log in to the web browser interface and click Edgeware
Applications > Application Control. The Application Control
screen appears.
2
Click to uninstall an application.
There are two ways to configure your application to auto-start when the
reader boots:
•
Through the web browser.
•
Through the configuration file you deliver with the application.
Chapter 3 — Develop and Install RFID Applications
43