If1 Accessories - Honeywell 1026FF02F9 User Manual

LED Indicators
Icon Name
RFID
antenna
Ethernet

IF1 Accessories

IF1 Fixed RFID Reader Series User Manual
Color
Solid green
Blinking green
Blinking red
Off
Solid green
Flickering green Packets of information are being sent through the
Blinking green
and orange
Blinking red
Off
You can use these accessories (sold and ordered separately) with the
IF1. To order accessories, contact your local sales representative.
IF1 Accessories
Accessory
Wall Mounting Kit
Ethernet Connector
Kit
GPIO Cable
Chapter 1 — About the RFID Reader
Description
RF field is active
A tag is being interrogated.
The reader cannot output the requested RF power
level, or an RF fault is detected.
The reader is not powered.
The reader is powered, an Ethernet link is
established, and the host is connected.
Ethernet port.
An Ethernet link is established, but there is no
host connection.
The reader is powered, but an Ethernet link is not
established.
The reader is not powered.
Description
The wall mounting kit allows you to mount the IF1
to a flat surface.
The Ethernet Connector Kit provides a secure
connection from your Ethernet cable to the IF1
and is required if you need to maintain the IP66
rating of the IF1.
15-pin GPIO cable to connect General Purpose
Input/Output control lines to external devices.
5