Download Print this page

Configuration File Example; Archive The Installation Files; How Install Rfid Applications - Honeywell 1026FF02F9 User Manual

Fixed mount rfid reader if1 series
Hide thumbs

Advertisement

Archive the Installation Files

How Install RFID Applications

IF1 Fixed RFID Reader User Manual
where:
AUTOSTART
specifies whether the application automatically starts
when the reader boots.
RUNAFTERINSTALL
immediately after installation.
specifies the application name and optional parameters it
CMDLINE
accepts. Specify command line parameters as if the application is
being executed from inside the directory containing the application.
2
Save the configuration file with the name userapp.conf.

Configuration File Example

This example auto-starts an application when the reader boots and runs
an application named testapp.exe:
AUTOSTART=true
RUNAFTERINSTALL=false
CMDLINE=./testapp.exe
Note: The reader executes applications from their installation directories,
so the userapp.conf file does not need to include path information.
To install an RFID application on the reader, you need to package the
configuration file and application.
1
Create a configuration file named userapp.conf.
2
Package the userapp.conf file and your application into one of these
formats: .zip, .tar/bz2, or .tar/gz file. Your application can now be
installed on the reader.
There are two ways to install your RFID application:
Run the application on a remote server through TCP port 2189. All
processing is performed by the server.
Run the application locally on the reader. The application resides on
the reader, and much of the processing occurs on the reader.
Chapter 3 — Develop and Install RFID Applications
specifies whether the application starts
41

Advertisement

loading

This manual is also suitable for:

1026ff03f91026ff01