Table of Contents
Advertisement
Chapter 1 — About the RFID Reader
Log In to the Web Browser Interface
12
After the reader is assigned an IP address, you can configure the reader
through the web browser interface. Before you log in, make sure an IP
address has been assigned to the reader, and the reader is connected to
your network.
1
Start a web browser.
2
In the browser address field, enter the IP address, and press Enter.
3
(Optional) For a secure session, click A secure session is
available.
4
Enter your Username and Password. The default user name is
intermec
and the default password is
5
Click Non-Secure Login, or Secure Login. The Ethernet screen
appears and you are logged in to the web browser interface.
intermec
IF1 Fixed RFID Reader Series User Manual
.
Advertisement
Table of Contents
