Application In Access Control Systems; Led Indication; Access Control Function; Activate Control Functions/Macros - Honeywell Accentic 026423 Operating Instructions Manual

24
5.

Application in access control systems

5.1

LED indication

The LEDs and the buzzer are controlled over a bus system. The definition for each is specified in the
main software and not at the reader.
At readers with Clock/Data interface the yellow LED lights permanently and can not be switched off.
At readers with RS-485 interface the yellow LED can be switched dark via software.
green
yellow
red
5.2

Access control function

0....9
Enter PIN or door code (RS-485 only)
and
or
Hold the data carrier in the reading field
ID
5.3

Activate control functions/macros

r
Press the "X" button
0....9
Enter PIN or door code
and
or
ID Hold the data carrier in the reading field
0....9
Enter the function number (macro number)
3
or
For more informations see Supplementary Functions IQ MultiAccess
(P32205-46-0G0-xx)
Operating Instructions mifare/DESFire EV1 reader "Accentic" with/without keypad
Color Basic
condition
yellow on
yellow off
green on
red on
green
red
red
r
Confirm with the "OK" or the "X" button.
"
After reading
a card or after
a keystroke
Operation / ready to read
Device is idle
PIN-Code or door code entry is active
(only possible with RS-485 interface)
Permanently released
Permanently blocked
on Door release
on ID card not authorized
blinking Read error
(RS-485 only)
Meaning
possible
possible
"