Llrp Settings; Configure Security - Honeywell 1026FF02F9 User Manual

Fixed mount rfid reader if1 series
Hide thumbs


Table of Contents

LLRP Settings

Secure Server Enable
Unsecure Server Enable Allows connections to the unsecure LLRP sever on port 5084.
Download Intermec
Extensions Definition
Reader Initiated

Configure Security

IF1 Fixed RFID Reader Series User Manual
LLRP Settings
LLRP settings establish an interface method between the reader and a
Allows connections to the secure LLRP server on port 5085.
Downloads an XML file that describes Intermec by Honewell-
specific extensions for the LLRP protocol.
For reader-initiated TCP/IP connections to a remote LLRP client.
Client address - The IP address of the remote LLRP client.
TCP port - Port number for the TCP/IP socket connection.
Enable security (TLS) - Select this option to enable Transport
Layer Security for this TCP/IP connection.
To make sure the reader is secure, change your security settings when
you set up your reader. You can secure the reader by:
changing user credentials.
enabling a RADIUS server.
enabling or disabling serial configuration.
Chapter 2 — Configure the Reader


Table of Contents

  Related Content for Honeywell 1026FF02F9

This manual is also suitable for: