Lippert Components Ground Control 3.0 Service Manual page 7

Fig. 6
A
Bottom of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension,
1.
Find the port on the bottom of the jack motor (Fig. 9A).
2. Remove the rubber plug (Fig. 10A).
5/16
3.
Insert the " socket into the port (Fig. 11).
4.
Turn override until the jack extends or retracts to desired position.
Fig. 9
A
Rev: 05.23.2017
Fig. 7
A
5/16
" socket
Fig. 10
A
Fig. 8
Page 7 Ground Control 3.0 Service Manual
Fig. 11