Packing List; Specifications - Eagle Tree Systems Vector User Manual

Vector multirotor/fixed wing flight controller plus osd
Table of Contents

Advertisement

2.2 Packing List

Your package should include the following:
Vector Controller
Current Sensor/PSU (Deans
GPS/Magnetometer (GPS/Mag), with GPS stand, clip and screw
Video, Audio (not shown), GPS, and Receiver Harnesses

2.3 Specifications

Supported Airframes:
o Traditional fixed wing, Elevon, and V-tail planes
o Tricopter, Quadcopter, and Hexacopter multirotors
Recommended Airframes:
limited testing on these types of models at this
nitro models, turbines, or multirotors larger than 650mm are not recommended.
Video formats: composite NTSC and PAL (autodetect)
Servo/ESC Output framerate:
o Fixed wing: adjustable up to 400Hz
o Multirotor (including tricopter yaw servo): 400Hz
Dimensions (L x W x H, approximate):
o Controller: 65mm x 33mm x 14mm
o GPS/Mag: 35mm x 24mm x 15mm
o Current Sensor/PSU (with Deans™): 42mm x 19mm x 18mm
Mass (approximate):
o Controller: 21g
o GPS/Mag: 13g
o Current Sensor/PSU (with Deans™): 15g
Current Sensor/PSU
o Peak measured current: 140 amps (see section 3.4)
o Max pack voltage: 6s/25.2V
o Maximum 12V PSU current: 1A
o Maximum 5V PSU current: 1A
, XT60
or wire leads version),
TM
TM
the Vector is not recommended for large or heavy airframes, due to no or
time. Examples: giant scale fixed wing models, gas or
USER GUIDE
8

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Eagle Tree Systems Vector

Table of Contents