Eagle Tree Systems Vector User Manual page 24

The chart below shows typical receiver and servo/ESC connections for these airframe types.
* The Receiver Output and Vector Rx Harness sections do not apply to SPPM or S.BUS™ receiver modes.
Airframe
Airframe Type
Traditional Fixed Traditional
Fixed
Fixed Wing with 2 Traditional
nd
Aileron, Flaperon, Fixed
Elevator, or Rudder
(with Tx Mixing)
Elevon or V-Tail Elevon
without Ailerons
V-Tail with Ailerons V-Tail
Vector Receiver Output*
Rudder
Aileron
Elevator
Throttle
2/3 position
Mode Switch
Gain Knob or
Submode switch
Rudder
Aileron
Elevator
Throttle
2 Aileron,
nd
Elevator, Rudder
or Flaperon
2/3 position
Mode Switch
Rudder (if used)
Aileron
Elevator
Throttle
2/3 position
Mode Switch
Gain Knob or
Submode switch
Rudder
Aileron
Elevator
Throttle
Vector Rx Vector Output
Harness*
Rud Rudder/M1
Ail Aileron/M2
Elv Elevator/M3
Thr Throttle/M4
Mod N/A
Aux N/A
Rud Rudder/M1
Ail Aileron/M2
Elv Elevator/M3
Thr Throttle/M4
Aux Aux1/M5 (or
N/A)
Mod N/A
Rud Rudder/M1
Ail Aileron/M2
Elv Elevator/M3
Thr Throttle/M4
Mod N/A
Aux N/A
Rud Rudder/M1
Ail Aileron/M2
Elv Elevator/M3
Thr Throttle/M4
USER GUIDE
Servo/ESC
Connection at
Model
Rudder Servo
Aileron Servo
Elevator Servo
Motor ESC or Throt
Servo
N/A
N/A
Rudder Servo
Aileron Servo
Elevator Servo
Motor ESC or Throt
Servo
2 Aileron,
nd
Elevator, Rudder or
Flaperon
N/A
Rudder Servo
Elevon Servo 1
Elevon Servo 2
ESC or Throttle
Servo
N/A
N/A
V-Tail Servo 2
Aileron Servo
V-Tail Servo 1
Motor ESC or Throt
Servo
24